MAXX Pro CNC Aluminium Hop-up Chamber For M4/M16 - W/O LED Module - RED - airsoftgateway.com

MAXX AEG M4/M16 Pro CNC Aluminum Hop-Up Chamber without LED Module - RED

  • $64.95


MAXX Pro CNC Aluminium Hop-up Chamber For M4/M16 - W/O LED Module - RED 

CNC Aluminum Hopup Chamber TE Pro with Latching System unit is specifically designed for fast-feeding BBs and prevents dropping BBs after removing the magazine on M4/M16 series AEG Airsoft Rifles. 
The Hopup Chamber TE unit is machined from a solid aircraft aluminum block with tight tolerances to provide better accuracy, consistency, and durability for your airsoft rifles. 
The Hopup Chamber TE unit is equipped with 2 Vinyl Covers on both sides of the hop-up housing to prevent dust and view the BBs that are left inside the hop-up chamber. 
The Hopup Chamber TE unit has a Dial Knob built-in for precise adjustments and specially re-engineered the Hopup Arms to work with R-hop, Flat-Hop, and Standard-Hop precisely and consistently to keep the BBs shooting straight and accurate on every single shot. CNC Brass Threaded Slot Pin can be also easily removable for adjustment and maintenance. 
The Hopup Chamber TE unit is well-engineered to accept a wide range of Air Seal Nozzle lengths from 20.50mm to 21.00mm and is fully compatible with most aftermarket soft and hard rubber bucking without losing FPS or dropping BBs. 
The Hopup Chamber TE Housing is equipped with 3 O-rings, and 3 Compression Springs on top, at the bottom, and in the center of the housing to ensure the hop-up unit is exactly centered, straight and airtight at all times when adapted to any V2 gearboxes with 11mm or 12mm bore. 
More than that, the Hopup Chamber TE Pro unit is specially designed with BB Latching System for automatically locking BBs into the Hopup Chamber to prevent dropping BBs after removing the magazine. 
And yet, the Latching System will be automatically opened fully for fast shooting after the magazine is re-inserted. The Latching System can be also manually opened to release BBs from Hopup Chamber by hand. 

***LED and Electronic Modules can be also added onto this hop-up chamber unit as an option for BBs to glow in the dark. Operating Voltage from 7VDC - 20VDC (2-5 cells LiPo, 6-16 cells NiCad). 
***Test results: FPS might be increased by 5% to 10%. Please check your FPS!

 

Includes

  • 1 x CNC Aluminum Hopup Chamber TE Pro with Latching System unit
  • 2 x CNC Vinyl Covers
  • 1 x CNC Aluminum Standard-Hop Arm
  • 1 x CNC Aluminum R-Hop Arm
  • 1 x Silicone Rubber Standard-Hop Nub Damper
  • 1 x Silicone Rubber R-Hop Nub Damper
  • 1 x CNC Aluminum 5mm length Precision R-Hop Nub
  • 1 x CNC Aluminum 6mm length Precision R-Hop Nub
  • 1 x CNC Brass Threaded Slot Pin
  • 1 x CNC Delrin Locking C-Clip
  • 1 x CNC Barrel Brass Spacer
  • 1 x Steel Central Compression Spring

Specification
Overall Length: 52.25mm
Overall Height: 37.75mm
Hub Outer Diameter (to fit into Outer Barrel): min 12mm
Hub Inner Diameter (to fit Nozzle): max 8mm
Feeder Outer Diameter (to fit magazine): min 9.25mm
Feeder Length (to fit magazine): max 6.25mm
Material: Aluminum 6061

 

Features
Machined from a solid aircraft aluminum block with tight tolerances to provide better accuracy, consistency, and durability
Designed for fast feeding BBs and preventing dropping BBs after removing magazine on M4/M16 series AEG Airsoft Rifles
Designed with BB Latching System for automatically locking BBs into the Hopup Chamber to prevent dropping BBs after removing the magazine
Automatically opened Latch fully for fast shooting after the magazine re-inserted
Manually opened Latch to release BBs from Hopup Chamber by hand
Dial Knob built-in for precise adjustments
Specially re-engineered the Hopup Arms to work with R-hop, Flat-Hop, and Standard-Hop precisely and consistently
Removable Brass Threaded Slot Pin for adjustment and maintenance
Accepts the wide range of Air Seal Nozzle's lengths from 20.50mm to 21.00mm
Fully compatible with most aftermarket soft and hard rubber bucking without losing FPS or dropping BBs
Equipped with 3 O-rings, 3 Compression Springs on top, at the bottom, and in the center of the housing to ensure the hop-up unit is exactly centered, straight and airtight at all times
Equipped with 2 Vinyl Covers on both sides of the hop-up housing to prevent dust and view the BBs that left inside the hop-up chamber
Compatible with any V2 gearboxes with 11mm or 12mm bore
LED and Electronic Modules are ready! Operating Voltage from 7VDC - 20VDC (2-5 cells LiPo, 6-16 cells NiCad)