G&G CM16 SRS AEG Airsoft Rifle TAN

Externally, this is one of the nicest looking Combat Machine G&G has ever come up with yet. From the front, the G&G CM16 SRS is equipped with an aggressive looking plastic orange flash suppressor that can accept an aftermarket mock silencer that will give the AEG a different look. Rail sections can be mounted onto the full metal keymod rail system at the 45, 90 and 180 degree angle. The front and rear iron sights are adjustable, these sights can also be flipped down to be used as back up or remove from the gun to provide more space for another type of sighting system such as red dot or long range scope.

The G&G CM16 SRS comes with the new GOS-V3 6 position crane stock which is also a battery compartment; this stock can house a large variety of nunchuck (butterfly) batteries. To access the battery compartment, simply press the button on top of the stock, and twist the butt pad. Toward the back of the stock is a QD sling mount slot, and a small back up battery compartment for flashlight or red dot sight is located right under this QD sling mount slot. The butt pad is thick and rubberized which feels very comfortable when shouldering the AEG.

Internally, the G&G CM16 SRS AEGs utilize the Version 2 gearbox with a few new parts. The V2 gearbox is compatible with a large variety of aftermarket upgrade and repair parts. All G&G CM16 SRS AEGs also comes with a micro switch and a programmable mosfet combo, which enhances the trigger response immensely compare to regular Combat Machines. The Mosfet unit is located inside the buffer tube; this mosfet can be programmed to change from full auto into 3-round burst fire mode.

Changing fire mode can be done on the go by simply switching the fire mode to semi, then hold the trigger for 10 seconds, and the full auto function will change to 3-round burst. To switch it back to full auto, simply repeat the steps above or unplug the battery for a few seconds to reset back to normal.

It is recommended to power this AEG using a 9.6V NiMH battery. It is also possible to use 11.1V Lipo battery for this AEG to achieve a higher rate of fire, faster trigger response and quicker burst on 3-round burst fire mode, although this will result in an increase of wear and tear.

The hop up, inner barrel assembly in the G&G CM16 SRS consists of a 205mm aluminum inner barrel, G&G standard plastic hop up unit, and G&G green bucking. All these parts can be replaced with compatible aftermarket upgrade parts.

The G&G CM16 SRS shoots at an average of 330-350FPS with .20g BBs. With this FPS and barrel length the G&G CM16 SRS is an ideal AEG for CQB or Close Quarters scenarios that requires room clearing and fast movement. This G&G CM16 SRS comes with the airsoft gun itself and a 300 rounds magazine, also available is the G&G CM16 SRS Combo package which includes the airsoft gun, 300rd magazine, 9.6v battery and G&G smart charger.

Features & Specs:

Manufacturer: G&G
Name: Combat Machine CM16 SRS Airsoft Gun
SKU: EGC-16P-SRS-DNB-NCM
Color: DST / TAN
Type: Electric
Fire Mode: Programmable Semi/Full Auto or Semi/3rd Burst
HopUp: Yes, Adjustable
Upper/Lower Receiver: High Quality Fiber Reinforced Polymer
Outer Barrel: 8" Metal Outer Barrel
Inner Barrel Length: 205mm
Gearbox: Full Metal Gearbox
Gearset: Metal Heat Treated Gearset
Bushing: 8mm Oiless
Mosfet: Yes
BB Velocity: 330-350FPS
Range: 100-150FT
Magazine Capacity: 300rd Hi-Cap
Lipo Ready: Yes
Weight: 5lbs
Programmable Semi/Full Auto or Semi, 3rd Burst
Fiber Reinforced Polymer
7" Keymod Rail System
Flip-Up Front & Rear Sights
Ambidextrous Magazine Release
Enhanced Fire Selector Switch
Enhanced Ambidextrous Charging Handle
Enhanced 6-position retractable stock

Package Inlcudes:

1x G&G Combat Machine CM16 SRS Airsoft Gun Tan / DST
1x 300rd Hi-Cap Magazine
1x User Manual
Battery & Charger not included
90 Day Manufacturer's Warranty

Tags: AEG M4 Indoors